Online Software Help Manual

Display Legacy Contents

Auto scale Y

The auto scale Y function resets the current view port along the y-axis and re-scales all objects enclosed in a way, that the maximum y-axis range of all objects enclosed is visible again. All other axes remain unchanged. Whenever the user wants to see the full data range along the y-axis of all objects, e.g. after he has zoomed into a particular data objects area to see details, he might apply this function.

The auto scale Y function is applied to all available data objects in the current active data view. So the view port is re-scaled to show the complete y-axis of all data objects. If you just like to re-scale the view port to fit the current active object, please use the auto scale Y active function.

This function is used with 2D data objects and 3D data objects.

The auto scale Y function is applied as follows:

Auto scale Y menu command

To apply the auto scale Y function using the menu command, please follow the instructions below:

  1. Activate the data view of interest, that needs to be auto scaled.

  2. From the 2D View menu or 3D View menu, select the Auto Scale Y command.

Auto scale Y keyboard shortcut